Package rpi4-boot-switch: Information
Source package: rpi4-boot-switch
Version: 0.10-alt1
Build time: Jul 8, 2020, 11:55 AM in the task #254318
Category: System/Configuration/Other
Report package bugLicense: GPL-2.0-or-later
Summary: Switch of boot mode for Raspberry Pi 4
Description:
Switch of boot mode for Raspberry Pi 4 In Alt, it is customary to load the kernel, dtb and initrd using u-boot and configuration in extlinux.conf. Firmware Raspberry Pi 4 loads and modifies dtb according to config.txt configuration. U-boot doesn't. The scripts in this package allow you to switch boot modes: Firmware loads the kernel, dtb, and initrd. U-boot is not used. Firmware loads dtb. U-boot loads the kernel and initrd. U-boot loads the kernel, dtb, and initrd.
List of rpms provided by this srpm:
rpi4-boot-nouboot-filetrigger (noarch)
rpi4-boot-switch (noarch)
rpi4-boot-uboot-filetrigger (noarch)
rpi4-boot-nouboot-filetrigger (noarch)
rpi4-boot-switch (noarch)
rpi4-boot-uboot-filetrigger (noarch)
Maintainer: Dmitry Terekhin
Last changed
June 28, 2020 Anton Midyukov 0.10-alt1
- Initiate allocation of common code in rpi4-boot-common - Copy dtb for RasPi3 also - Do not add devicetree to config.txt - Do not backup config.txt every time
June 9, 2020 Dmitry Terekhin 0.9-alt1
- rpi4-boot-nouboot: removed cma=192M option from kernel cmd line
June 4, 2020 Dmitry Terekhin 0.8-alt1
- Removed read-only remounting - Changed copying kernel, initrd, dtb to FAT - Added copying overlays along with dtb