Пакет python3: Specfile

# ======================================================
# Conditionals and other variables controlling the build
# ======================================================

%define _unpackaged_files_terminate_build 1

# Below the same shorthands as in Redhat's spec are definied,
# but mostly through ALT Sisyphus rpm-build-python3's macros
# (to make the picture more clear and less error-prone).

%global pybasever 3.10
# pybasever without the dot:
%global pyshortver 310

%global pyabi %nil

%global pynameabi python%pybasever%pyabi

# Here, we re-use the machinery of rpm-build-python3 definitions
# to generate the paths etc. in the way they are usually determined
# for the build system. (The input to this machinery is:
# %%__python3_version and %%__python3_abiflags;

%global __python3_version %pybasever
# the above also affects %%_python3_abi_version the way we need indeed.
%global __python3_abiflags %pyabi
# the above also affects %%_python3_abiflags

# they normally refer to Python3 installed in the build system,
# but we are building a new one, and not going to use the old one).

%global pylibdir %__python3_libdir
%global dynload_dir %__python3_dynlibdir
%global include_dir %__python3_includedir
%global tool_dir %__python3_tooldir
%global pylibdir_noarch %__python3_libdir_noarch

%global pyarch %{expand:%(echo %{_arch}-linux-gnu | \
sed -E -e 's/^i586-linux-gnu$/i386-linux-gnu/' | \
sed -E -e 's/^armh-linux-gnu$/arm-linux-gnueabihf/' | \
sed -E -e 's/^mips64(el)?-linux-gnu$/mips64\\1-linux-gnuabi64/' | \
sed -E -e 's/^ppc(64)?(le)?-linux-gnu$/powerpc\\1\\2-linux-gnu/' | \
sed -E -e 's/^e2k[^-]{,3}-linux-gnu$/e2k-linux-gnu/')}

# All bytecode files are now in a __pycache__ subdirectory, with a name
# reflecting the version of the bytecode (to permit sharing of python libraries
# between different runtimes)
# See http://www.python.org/dev/peps/pep-3147/
# For example,
#   foo/bar.py
# now has bytecode at:
#   foo/__pycache__/bar.cpython-35.pyc
#   foo/__pycache__/bar.cpython-35.pyo
%global bytecode_suffixes .cpython-%{pyshortver}*.py?

# Python's configure script defines SOVERSION, and this is used in the Makefile
# to determine INSTSONAME, the name of the libpython DSO:
#   LDLIBRARY='libpython$(VERSION).so'
#   INSTSONAME="$LDLIBRARY".$SOVERSION
# We mirror this here in order to make it easier to add the -gdb.py hooks.
# (if these get out of sync, the payload of the libs subpackage will fail
# and halt the build)
%global py_SOVERSION 1.0

# some arches don't have valgrind so we need to disable its support on them
%ifnarch s390 riscv64 %e2k
%def_with valgrind
%else
%def_without valgrind
%endif

%global _optlevel 3
# details at https://www.altlinux.org/LTO
%global optflags_lto %optflags_lto -ffat-lto-objects

%def_with gdbm
%def_with bluez
%def_with x11

%if_with x11
%def_with tk
%def_with gl
%else
%def_without tk
%def_without gl
%endif

Name: python3
Version: %{pybasever}.6
Release: alt1

Summary: Version 3 of the Python programming language aka Python 3000

License: Python
Group: Development/Python3
Url: http://www.python.org/

# New common location for site-packages is supported since 0.1.9.
# %%python3_ABI_dep is defined since 0.1.9.1.
# The path macros brought in sync in 0.1.9.2.
# %%__libpython3 macro is defined and used for the verify_elf trick
# since 0.1.9.3.
BuildRequires(pre): rpm-build-python3 >= 0.1.9.3
BuildPreReq: liblzma-devel
# For Bluetooth support
# see https://bugzilla.redhat.com/show_bug.cgi?id=879720
BuildRequires: bzip2-devel db4-devel libexpat-devel gcc-c++ libgmp-devel
BuildRequires: libffi-devel libncursesw-devel mpdecimal-devel
BuildRequires: libssl-devel libreadline-devel libsqlite3-devel
BuildRequires: zlib-devel libuuid-devel libnsl2-devel
BuildRequires: desktop-file-utils autoconf-archive
%{?_with_bluez:BuildPreReq: libbluez-devel}
%{?_with_x11:BuildRequires: libX11-devel}
%{?_with_tk:BuildRequires: tcl-devel tk-devel}
%{?_with_gl:BuildRequires: libGL-devel}
%{?_with_gdbm:BuildRequires: gdbm-devel}
%{?_with_valgrind:BuildRequires: valgrind-devel}
%{?!_without_check:%{?!_disable_check:BuildRequires: /dev/pts /proc}}

# Fix find-requires
%global __python3 %buildroot%_bindir/python3
%add_python3_path %pylibdir
#Do not recompile .py files with old python3
%add_python3_compile_exclude %pylibdir
# Help verify_elf:
%global __libpython3 %buildroot%__libpython3

Source: %name-%version.tar

# Desktop menu entry for idle3
Source10: idle3.desktop

#RH Patches

# 00001 #
# Fixup distutils/unixccompiler.py to remove standard library path from rpath:
# Was Patch0 in ivazquez' python3000 specfile:
Patch1: 00001-rpath.patch

#ALT Linux patches

# RLIMIT 1000000 unavailable in hasher
Patch1003: python-3.8.0-skip-test_setrusage_refcount-alt.patch

# Disable "-i386-linux-gnu"-like suffixes for lib-dynload/*.so modules.
# Disables test for those suffixes.
Patch1004: python-3.5.1-alt-disable-build-PLATFORM_TRIPLET.patch

# Use a common /usr/lib/python3/site-packages (without the minor version)
Patch1005: python3-site-packages.patch
# %%python3_sitelibdir{,_noarch} from rpm-build-python3 >= 0.1.9
# are consistent with this.
# (TODO: Perhaps, we should consider substituting the value of the macros into the patch,
# so that we have a single point of control and a guarantee of consistency.)

# With python-3.6 and later it's either needed to enable some crypto ciphers needed for SSLv2 when this socket type requested
# or SSLv2 has to be removed completely, because it wouldn't work without this change anyway.
Patch1007: python3-sslv2-compat.patch

# 'Trust mode': optional modules loading paths restriction
Patch1011: python3-ignore-env-trust-security.patch

# set shebang to explicit python2
Patch1012: python3-alt-2to3-python-version.patch

# ======================================================
# Additional metadata, and subpackages
# ======================================================

# Like in Fedora:
Provides: python(abi) = %pybasever

# ALT's special name (looking like: python3.3-ABI(64bit)):
#
# (BTW, %%ABI_suffix is computed in a new-arch-ABI-proof way:
# if a new weird arch-ABI arises, at least, we'll have
# a weird suffix here, not coinciding with another existing one.)
Provides: %python3_ABI_dep

Requires: %name-base = %EVR

%description
Python 3 is a new version of the language that is incompatible with the 2.x
line of releases. The language is mostly the same, but many details, especially
how built-in objects like dictionaries and strings work, have changed
considerably, and a lot of deprecated features have finally been removed.

%package base
Summary: Python 3 runtime libraries
Group: Development/Python3
Provides: %name-libs = %EVR
Obsoletes: %name-libs < %EVR
%py3_provides builtins
# Prepare for the future default method (to test the result earlier):
%python3_req_hier
# It's an OS-independent alias (which other modules might want to import)
# leading to an OS-specific path module.
%py3_provides os.path
%py3_provides typing.io

%py3_provides _frozen_importlib
%py3_provides _frozen_importlib_external

# Things which have become internal in 3.5
# (we do not use %%py3_provides here, because the autoreqs generated
# with this new version of python3 must not include these ones;
# they are only needed to run non-recompiled modules):
Provides: python3.3(time)
Provides: python3.3(atexit)

%filter_from_requires /^%name[[:space:]]/d
%filter_from_requires /^\/usr\/bin\/%name/d

# The package that may have provided the common
# /usr/lib{,64}/python3/site-packages
# before we patched python3 itself for supporting this path.
%define python3_sitebasename %(basename %(dirname %python3_sitelibdir))
Obsoletes: %python3_sitebasename-site-packages

%description base
This package contains files used to embed Python 3 into applications.

%package dev
Summary: Libraries and header files needed for Python 3 development
Group: Development/Python3
Requires: %name = %EVR
Requires: lib%name = %EVR
Conflicts: %name < %EVR
Provides: %name-devel = %pybasever
Provides: lib%name-devel = %EVR

# ALT Sisyphus RPM Macros Packaging Policy
# makes sure that the RPM support for building
# the language-specific modules comes together with
# the compiler/-devel pkgs:
Requires: rpm-build-python3 >= 0.1.9

%description dev
This package contains libraries and header files used to build applications
with and native libraries for Python 3

%package -n libpython3
Summary: Python3 shared library
Group: Development/Python3
Requires: %name-base = %EVR

%description -n libpython3
This package contains Python3 shared library

%package tools
Summary: A collection of tools included with Python 3
Group: Development/Python3
Requires: %name = %EVR
Requires: %name-modules-tkinter = %EVR
Requires: %name-modules-curses = %EVR
# No real need in python-base in this package
%filter_from_requires /^python-base/d
%filter_from_requires /^python2-base/d

%description tools
This package contains several tools included with Python 3

%package modules-tkinter
Summary: A GUI toolkit for Python 3
Group: Development/Python3
Provides: %name-modules-idlelib = %EVR
Obsoletes: %name-modules-idlelib < 3.3.1-alt4
Requires: tk tcl-tix

%description modules-tkinter
The Tkinter (Tk interface) program is an graphical user interface for
the Python scripting language.

%package modules-sqlite3
Summary: DB-API 2.0 interface for SQLite databases
Group: Development/Python3

%description modules-sqlite3
SQLite is a C library that provides a lightweight disk-based database
that doesn't require a separate server process and allows accessing
the database using a nonstandard variant of the SQL query language.
Some applications can use SQLite for internal data storage.  It's also
possible to prototype an application using SQLite and then port the
code to a larger database such as PostgreSQL or Oracle.

%package modules-curses
Summary: Python3 "curses" module
Group: Development/Python3

%description modules-curses
An interface to the curses library, providing portable terminal
handling. The Curses module provides an interface to the curses library, the
de-facto standard for portable advanced terminal handling.
This extension module is designed to match the API of ncurses, an
open-source curses library hosted on Linux and the BSD variants of UNIX.

%package test
Summary: The test modules from the main python 3 package
Group: Development/Python3
Requires: %name = %EVR
Requires: %name-modules-tkinter = %EVR
Requires: %name-modules-curses = %EVR
Requires: %name-modules-sqlite3 = %EVR
Requires: %name-tools = %EVR
%add_python3_req_skip test.test_warnings.data msvcrt _winapi

%description test
The test modules from the main %name package.
These are in a separate package to save space, as they are almost never used
in production.

You might want to install the python3-test package if you're developing
python 3 code that uses more than just unittest and/or test_support.py.

%prep
%setup

# Ensure that we're using the system copy of various libraries, rather than
# copies shipped by upstream in the tarball:
rm -r Modules/expat || exit 1
rm -r Modules/_decimal/libmpdec || exit 1

#   Remove embedded copy of libffi:
for SUBDIR in darwin libffi_osx ; do
  rm -r Modules/_ctypes/$SUBDIR || exit 1 ;
done

# Don't build upstream Python's implementation of these crypto algorithms;
# instead rely on _hashlib and OpenSSL.
#
# For example, in our builds hashlib.md5 is implemented within _hashlib via
# OpenSSL (and thus respects FIPS mode), and does not fall back to _md5
# TODO: there seems to be no OpenSSL support in Python for sha3 so far
# when it is there, also remove _sha3/ dir
#for f in md5module.c sha1module.c sha256module.c sha512module.c; do
#    rm Modules/$f
#done

#
# Apply patches:
#
%patch1 -p1

# ALT Linux patches
%patch1003 -p2
%patch1004 -p1

%patch1005 -p2

%patch1007 -p2

%patch1011 -p2
%patch1012 -p2

%ifarch %e2k
# add e2k arch
sed -i "/elif defined(__hppa__)/i\\\n# elif defined (__e2k__)\n        e2k-linux-gnu" configure*
# unsupported profiling option
sed -i "s| -fprofile-correction||" configure*
# LCC profiling bug workaround
sed -i "/^Modules\\/_math.o:/{n;s|\$(CCSHARED) \$(PY_CORE_CFLAGS)|\$(filter-out -fprofile-generate-parallel,\$(CCSHARED) \$(PY_CORE_CFLAGS))|}" Makefile.pre.in
sed -i "s|-fprofile-generate|-fprofile-generate-parallel|" configure*
sed -i "s/rm -f profile-clean-stamp/&; eprof -s eprof.sum/" Makefile.pre.in
# exclude hanging tests
sed -i "s/^.*def test_stack_overflow(/    @unittest.skipIf(True, 'hangs')\n&/" Lib/test/test_faulthandler.py

# Faster interpreter on Elbrus:
# Patching with "sed" and "awk" gives more resilience against changes in
# Python sources. This patch tries to recreate the same optimization that
# was done using "computed gotos". But without using the GNU C extension
# "Labels as Values", the implementation of which is slow for the Elbrus
# compiler. This improves Python performance on Elbrus by about 10%.
# See ALT40278 for a detailed explanation.
sed -i "/#if USE_COMPUTED_GOTOS/{s|^|#undef USE_COMPUTED_GOTOS\n#define USE_COMPUTED_GOTOS 0\n|;:a;n;ba}" Python/ceval.c
sed -i "/_unknown_opcode:/{n;n;s|$|Py_UNREACHABLE();\n#include \"opcode_unknown.h\"|}" Python/ceval.c
awk '/_unknown_opcode/{print "case " NR-2 ":"}' Python/opcode_targets.h > Python/opcode_unknown.h
%endif

# remove test_winreg() function
begin='^def .*winreg.*'
end='^[^[:blank:]]'
sed -re "/$begin/,/$end/ {
            /$begin/d;
            /$end/b;
            d
        }" \
    -i Lib/test/audit-tests.py

rm -fr ../build-shared
mkdir ../build-shared
%autoreconf
cp -rl * ../build-shared/

# ======================================================
# Configuring and building the code:
# ======================================================
%build
build() {
# Note: "computed-gotos" are automatically detected by the configure script,
# must be turned off on e2k due to slow implementation.
%configure \
  --with-platlibdir=%{_lib} \
  --enable-ipv6 \
%ifnarch armh
  --enable-optimizations \
%endif
%ifarch %e2k
  --with-computed-gotos=no \
%endif
  --with-dbmliborder=gdbm:ndbm:bdb \
  --with-system-expat \
  --with-system-ffi \
  --with-system-libmpdec \
  --enable-loadable-sqlite-extensions \
  --with-lto \
  --with-ssl-default-suites=openssl \
%if_with valgrind
  --with-valgrind \
%endif
  --without-ensurepip \
  $*

%make_build
}

pushd ../build-shared
build --enable-shared
popd

build

# ======================================================
# Installing the built code:
# ======================================================
%install

# shared build only needed for libpython3
pushd ../build-shared
make install DESTDIR=%buildroot INSTALL="install -p"
popd

# static build is installed over shared because it's much faster
# the reason for such performance difference is unknown
find build -exec touch {} \;
make install DESTDIR=%buildroot INSTALL="install -p"

# Here we copy some config files to make python suggest to compile with shared
# library, not static. This can be verified by:
# python3 -c 'import sys ; import distutils.sysconfig ; sys.stdout.write(distutils.sysconfig.get_config_var("BLDLIBRARY"))'
# See more in ALT#40939
cp -av ../build-shared/Makefile %buildroot%pylibdir/config-%pybasever%pyabi-%pyarch/Makefile
cp -av ../build-shared/python-config %buildroot%_bindir/python3-config
cp -av ../build-shared/pyconfig.h %buildroot%include_dir
cp -av ../build-shared/build/lib.linux-*-%pybasever/_sysconfigdata__linux_%pyarch.py %buildroot%pylibdir

mv %buildroot%_bindir/2to3 %buildroot%_bindir/python3-2to3

# Development tools
install -m755 -d %buildroot%tool_dir
install Tools/README %buildroot%tool_dir/
cp -ar Tools/freeze %buildroot%tool_dir/
cp -ar Tools/i18n %buildroot%tool_dir/
cp -ar Tools/pynche %buildroot%tool_dir/
cp -ar Tools/scripts %buildroot%tool_dir/

# Documentation tools
install -m755 -d %buildroot%pylibdir/Doc
cp -ar Doc/tools %buildroot%pylibdir/Doc/

# Demo scripts
cp -ar Tools/demo %buildroot%tool_dir/

install -d -m 0755 %buildroot%python3_sitelibdir/__pycache__
%if "%_lib" != "lib"
install -d -m 0755 %buildroot%python3_sitelibdir_noarch/__pycache__
%endif
# The install scripts put a README in the old-style %pylibdir/site-packages
# (actually, they copy the tree from the sources).
# So, we move it by force (like in rpm-build-python for other python3 packages,
# but in a more controlled way: we make sure that we know exactly what we copy,
# otherwise rmdir would fail):
mv -t %buildroot%python3_sitelibdir/ %buildroot%pylibdir/site-packages/README.txt
rmdir %buildroot%pylibdir/site-packages

# For the list of architectures which has multilib support in ALT
# we make python3-devel multilib-ready (bug #192747, #139911)
%ifarch x86_64 %ix86
%global _pyconfig32_h pyconfig-32.h
%global _pyconfig64_h pyconfig-64.h

%ifarch x86_64
%global _pyconfig_h %_pyconfig64_h
%else
%global _pyconfig_h %_pyconfig32_h
%endif

mv %buildroot%include_dir/pyconfig.h  %buildroot%include_dir/%_pyconfig_h
cat > %buildroot%include_dir/pyconfig.h << EOF
#include <bits/wordsize.h>

#if __WORDSIZE == 32
#include "%_pyconfig32_h"
#elif __WORDSIZE == 64
#include "%_pyconfig64_h"
#else
#error "Unknown word size"
#endif
EOF

# Fix for bug 201434: make sure distutils looks at the right pyconfig.h file
# Similar for sysconfig: sysconfig.get_config_h_filename tries to locate
# pyconfig.h so it can be parsed, and needs to do this at runtime in site.py
# when python starts up (bug 653058)
#
# Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h
# variants:
sed -i -e "s/'pyconfig.h'/'%_pyconfig_h'/" \
  %buildroot%pylibdir/distutils/sysconfig.py \
  %buildroot%pylibdir/sysconfig.py
%else
%global _pyconfig_h pyconfig.h
%endif

# Install pathfix.py to bindir
# See https://github.com/fedora-python/python-rpm-porting/issues/24
cp -p Tools/scripts/pathfix.py %{buildroot}%{_bindir}/

# Remove shebang lines from .py files that aren't executable, and
# remove executability from .py files that don't have a shebang line:
find %buildroot -name \*.py \
  \( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \
  -print -exec sed -i '1d' {} \; \) -o \( \
  -perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \
  -exec chmod a-x {} \; \) \)

# Get rid of DOS batch files:
find %buildroot -name \*.bat -exec rm -v {} \;

# Get rid of backup files:
find %buildroot/ -name "*~" -exec rm -v {} \;
find . -name "*~" -exec rm -v {} \;

# Get rid of crappy code:
rm -v %buildroot%tool_dir/scripts/abitype.py
rm -v %buildroot%tool_dir/scripts/fixcid.py
rm -v %buildroot%pylibdir/encodings/{,__pycache__/}rot_13*.py*

# Skip the 2to3 test data (which might contain Python2 code)
%global lib2to3_tests %pylibdir/lib2to3/tests
%add_python3_compile_exclude %lib2to3_tests/data
%add_findreq_skiplist %lib2to3_tests/data/*
%add_findprov_skiplist %lib2to3_tests/data/*
# http://bugs.python.org/issue26911 :
# remove a seemingly unused source file with broken code (a broken import):
rm -v %buildroot%lib2to3_tests/{,__pycache__/}pytree_idempotency*.py*

# http://bugs.python.org/issue26912 :
# rm another seemingly unused source file with a broken import:
rm -v %buildroot%pylibdir/test/test_email/{,__pycache__/}torture_test*.py*

# Get rid of win tests
rm -v %buildroot%pylibdir/test/{,__pycache__/}test_winreg*.py*
rm -v %buildroot%pylibdir/test/{,__pycache__/}test_winsound*.py*
rm -v %buildroot%pylibdir/test/{,__pycache__/}win_console_handler*.py*
rm -v %buildroot%pylibdir/distutils/tests/{,__pycache__/}test_msvc{9,}compiler*.py*
rm -v %buildroot%pylibdir/test/test_importlib/{,__pycache__/}test_windows*.py*
rm -v %buildroot%pylibdir/test/libregrtest/{,__pycache__/}win_utils*.py*
# The libs which are being tested below have been excluded in %%files (long ago):
rm -v %buildroot%pylibdir/test/test_asyncio/{,__pycache__/}test_windows_events*.py*
rm -v %buildroot%pylibdir/test/test_asyncio/{,__pycache__/}test_windows_utils*.py*
rm -v %buildroot%pylibdir/test/{,__pycache__/}test_winconsoleio*.py*
rm -v %buildroot%pylibdir/test/{,__pycache__/}test_msilib*.py*

# Get rid of bad* tests -- just skip them:
%add_findreq_skiplist %pylibdir/test/bad*.py
%add_findprov_skiplist %pylibdir/test/bad*.py

# Get rid of windows-related stuff
%add_findreq_skiplist %pylibdir/distutils/*msvc*compiler*.py*
%add_findprov_skiplist %pylibdir/distutils/*msvc*compiler*.py*
rm -v %buildroot%pylibdir/distutils/command/{,__pycache__/}bdist_msi*.py*
rm -v %buildroot%tool_dir/scripts/win_add2path.py

# Get rid of crap
rm -v -r %buildroot%pylibdir/ctypes/macholib/fetch_macholib
rm -v %buildroot%tool_dir/scripts/md5sum.py
rm -v %buildroot%tool_dir/scripts/parseentities.py

# Remove sphinxext (temporary)
rm -v -r %buildroot%pylibdir/Doc/tools/{extensions,static,templates}
rm -v %buildroot%pylibdir/Doc/tools/susp-ignored.csv

# Fix end-of-line encodings:
find %buildroot/ -name \*.py -exec sed -i 's/\r//' {} \;

# Fixup permissions for shared libraries from non-standard 555 to standard 755:
find %buildroot \
    -perm 555 -exec chmod 755 {} \;

export LD_LIBRARY_PATH=%buildroot%_libdir
find %buildroot -type f -a -name "*.py" -a -not -wholename "*/test/*" -a -not -wholename "*/tests/*" -a -not -wholename "*/scripts/*" -print0 | xargs -0 %buildroot%_bindir/%name -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%buildroot")[2]) for f in sys.argv[1:]]'
find %buildroot -type f -a -name "*.py" -a -not -wholename "*/test/*" -a -not -wholename "*/tests/*" -a -not -wholename "*/scripts/*" -print0 | xargs -0 %buildroot%_bindir/%name -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%buildroot")[2]) for f in sys.argv[1:]]'

sed -i 's,/usr/local/bin/python,/usr/bin/python3,' %buildroot%_libdir/python%pybasever/cgi.py

# Replace the shell implementation with the more correct .py one
# (BTW, the .py one used to be packaged in python3-3.3):
ln -sfv \
    "$(relative \
    %pylibdir/config-%pybasever%pyabi-%pyarch/python-config.py \
    %_bindir/python%pybasever%pyabi-config)" \
    %buildroot%_bindir/python%pybasever%pyabi-config

%global python_ignored_files site-packages(/.+\.(pth|egg-info(|/PKG-INFO|/entry_points\.txt|/namespace_packages\.txt)))?$
mkdir -p %buildroot%_sysconfdir/buildreqs/files/ignore.d
cat > %buildroot%_sysconfdir/buildreqs/files/ignore.d/%name << EOF
^%_libdir/python3[^/]*/%python_ignored_files
%if "lib" != "%_lib"
^%prefix/lib/python3[^/]*/%python_ignored_files
%endif
EOF

mkdir -p %buildroot%_rpmlibdir
cat <<\EOF >%buildroot%_rpmlibdir/%name-base-files.req.list
# %name dirlist for %_rpmlibdir/files.req
%dynload_dir/	%name-base
%tool_dir/	%name-tools
EOF
# rpm-build-python3 has a dep on exactly this file with the list
# (for modularity: there used to be a separate package
# with these directories and the corresponding site customization):
cat <<\EOF >%buildroot%_rpmlibdir/%python3_sitebasename-site-packages-files.req.list
%(dirname %python3_sitelibdir)	%name-base
%python3_sitelibdir/	%name-base
%if "%_lib" != "lib"
%(dirname %python3_sitelibdir_noarch)/	%name-base
%python3_sitelibdir_noarch/	%name-base
%endif
EOF

# Remove extra LICENSE file
rm -v %buildroot/%pylibdir/LICENSE.txt

# add idle3 to menu
install -D -m 0644 Lib/idlelib/Icons/idle_16.png %buildroot%_datadir/icons/hicolor/16x16/apps/idle3.png
install -D -m 0644 Lib/idlelib/Icons/idle_32.png %buildroot%_datadir/icons/hicolor/32x32/apps/idle3.png
install -D -m 0644 Lib/idlelib/Icons/idle_48.png %buildroot%_datadir/icons/hicolor/48x48/apps/idle3.png
desktop-file-install --dir=%buildroot%_datadir/applications %SOURCE10

#h We want to have clean bindir
rm -rf %buildroot%_bindir/__pycache__

# Force remove nis on e2k
%ifarch %e2k
rm -f %buildroot%dynload_dir/nis.cpython-%pyshortver%pyabi.so
%endif

# Clean after static build
rm -v %buildroot/%_libdir/libpython%pybasever%pyabi.a

%check
# ALT#32008:
if head -1 %buildroot%_bindir/python3-config | fgrep -q python; then
configdir="$(
    WITHIN_PYTHON_RPM_BUILD= \
    LD_LIBRARY_PATH=$(pwd) \
    $(pwd)/python %buildroot%_bindir/python3-config --configdir)"
else
configdir="$(%buildroot%_bindir/python3-config --configdir)"
fi
[ -d %buildroot"$configdir" ]

# Ensure that the curses module was linked against libncursesw.so, rather than
# libncurses.so
# See https://bugzilla.redhat.com/show_bug.cgi?id=539917
ldd %{buildroot}/%{dynload_dir}/_curses*.so \
| grep curses \
| grep libncurses.so && {echo "_curses.so linked against libncurses.so"; exit 1 }

# See about locale: https://www.python.org/dev/peps/pep-0538/
export LANG=C

# Show some info, helpful for debugging test failures
LD_LIBRARY_PATH="$(pwd)" $(pwd)/python -m test.pythoninfo

# -l (--findleaks) is not compatible with -j
WITHIN_PYTHON_RPM_BUILD= \
LD_LIBRARY_PATH="$(pwd)" \
$(pwd)/python -m test.regrtest \
%ifarch %e2k
    -x test_socket -x test_signal \
%endif
    --verbose --timeout=1800 %_smp_mflags

%files
%doc LICENSE README.rst
%_bindir/pydoc*
%_bindir/python3
%_bindir/python%pybasever
%_mandir/*/*

%files base
%doc LICENSE README.rst
%config %_sysconfdir/buildreqs/files/ignore.d/%name
%_rpmlibdir/%name-base-files.req.list
%_rpmlibdir/%python3_sitebasename-site-packages-files.req.list

%dir %(dirname %python3_sitelibdir)
%dir %python3_sitelibdir/
%dir %python3_sitelibdir/__pycache__/
%python3_sitelibdir/README.txt

%if "%_lib" != "lib"
%dir %(dirname %python3_sitelibdir_noarch)
%dir %python3_sitelibdir_noarch/
%dir %python3_sitelibdir_noarch/__pycache__/
%endif

%dir %pylibdir
%dir %dynload_dir

%dynload_dir/_asyncio.cpython-%pyshortver%pyabi.so
%dynload_dir/_bisect.cpython-%pyshortver%pyabi.so
%dynload_dir/_blake2.cpython-%pyshortver%pyabi.so
%dynload_dir/_bz2.cpython-%pyshortver%pyabi.so
%dynload_dir/_codecs_cn.cpython-%pyshortver%pyabi.so
%dynload_dir/_codecs_hk.cpython-%pyshortver%pyabi.so
%dynload_dir/_codecs_iso2022.cpython-%pyshortver%pyabi.so
%dynload_dir/_codecs_jp.cpython-%pyshortver%pyabi.so
%dynload_dir/_codecs_kr.cpython-%pyshortver%pyabi.so
%dynload_dir/_codecs_tw.cpython-%pyshortver%pyabi.so
%dynload_dir/_contextvars.cpython-%pyshortver%pyabi.so
%dynload_dir/_crypt.cpython-%pyshortver%pyabi.so
%dynload_dir/_csv.cpython-%pyshortver%pyabi.so
%dynload_dir/_ctypes.cpython-%pyshortver%pyabi.so
%dynload_dir/_datetime.cpython-%pyshortver%pyabi.so
%dynload_dir/_dbm.cpython-%pyshortver%pyabi.so
%dynload_dir/_decimal.cpython-%pyshortver%pyabi.so
%dynload_dir/_elementtree.cpython-%pyshortver%pyabi.so
%if_with gdbm
%dynload_dir/_gdbm.cpython-%pyshortver%pyabi.so
%endif
%dynload_dir/_hashlib.cpython-%pyshortver%pyabi.so
%dynload_dir/_heapq.cpython-%pyshortver%pyabi.so
%dynload_dir/_json.cpython-%pyshortver%pyabi.so
%dynload_dir/_lsprof.cpython-%pyshortver%pyabi.so
%dynload_dir/_lzma.cpython-%pyshortver%pyabi.so
%dynload_dir/_md5.cpython-%pyshortver%pyabi.so
%dynload_dir/_multibytecodec.cpython-%pyshortver%pyabi.so
%dynload_dir/_multiprocessing.cpython-%pyshortver%pyabi.so
%dynload_dir/_opcode.cpython-%pyshortver%pyabi.so
%dynload_dir/_pickle.cpython-%pyshortver%pyabi.so
%dynload_dir/_posixshmem.cpython-%pyshortver%pyabi.so
%dynload_dir/_posixsubprocess.cpython-%pyshortver%pyabi.so
%dynload_dir/_queue.cpython-%pyshortver%pyabi.so
%dynload_dir/_random.cpython-%pyshortver%pyabi.so
%dynload_dir/_sha1.cpython-%pyshortver%pyabi.so
%dynload_dir/_sha256.cpython-%pyshortver%pyabi.so
%dynload_dir/_sha3.cpython-%pyshortver%pyabi.so
%dynload_dir/_sha512.cpython-%pyshortver%pyabi.so
%dynload_dir/_socket.cpython-%pyshortver%pyabi.so
%dynload_dir/_ssl.cpython-%pyshortver%pyabi.so
%dynload_dir/_statistics.cpython-%pyshortver%pyabi.so
%dynload_dir/_struct.cpython-%pyshortver%pyabi.so
%dynload_dir/_testinternalcapi.cpython-%pyshortver%pyabi.so
%dynload_dir/_testmultiphase.cpython-%pyshortver%pyabi.so
%dynload_dir/_uuid.cpython-%pyshortver%pyabi.so
%dynload_dir/_xxsubinterpreters.cpython-%pyshortver%pyabi.so
%dynload_dir/_xxtestfuzz.cpython-%pyshortver%pyabi.so
%dynload_dir/_zoneinfo.cpython-%pyshortver%pyabi.so
%dynload_dir/array.cpython-%pyshortver%pyabi.so
%dynload_dir/audioop.cpython-%pyshortver%pyabi.so
%dynload_dir/binascii.cpython-%pyshortver%pyabi.so
%dynload_dir/cmath.cpython-%pyshortver%pyabi.so
%dynload_dir/fcntl.cpython-%pyshortver%pyabi.so
%dynload_dir/grp.cpython-%pyshortver%pyabi.so
%dynload_dir/math.cpython-%pyshortver%pyabi.so
%dynload_dir/mmap.cpython-%pyshortver%pyabi.so
%dynload_dir/ossaudiodev.cpython-%pyshortver%pyabi.so
%dynload_dir/pyexpat.cpython-%pyshortver%pyabi.so
%dynload_dir/readline.cpython-%pyshortver%pyabi.so
%dynload_dir/resource.cpython-%pyshortver%pyabi.so
%dynload_dir/select.cpython-%pyshortver%pyabi.so
%dynload_dir/spwd.cpython-%pyshortver%pyabi.so
%dynload_dir/syslog.cpython-%pyshortver%pyabi.so
%dynload_dir/termios.cpython-%pyshortver%pyabi.so
%dynload_dir/unicodedata.cpython-%pyshortver%pyabi.so
%dynload_dir/xxlimited.cpython-%pyshortver%pyabi.so
%dynload_dir/xxlimited_35.cpython-%pyshortver%pyabi.so
%dynload_dir/zlib.cpython-%pyshortver%pyabi.so

%pylibdir/*.py
%dir %pylibdir/__pycache__/
%pylibdir/__pycache__/*%bytecode_suffixes

%dir %pylibdir/asyncio/
%dir %pylibdir/asyncio/__pycache__/
%pylibdir/asyncio/*.py
%exclude %pylibdir/asyncio/windows_events.py
%exclude %pylibdir/asyncio/windows_utils.py
%pylibdir/asyncio/__pycache__/*%bytecode_suffixes
%exclude %pylibdir/asyncio/__pycache__/windows_events%bytecode_suffixes
%exclude %pylibdir/asyncio/__pycache__/windows_utils%bytecode_suffixes

%dir %pylibdir/collections/
%dir %pylibdir/collections/__pycache__/
%pylibdir/collections/*.py
%pylibdir/collections/__pycache__/*%bytecode_suffixes

%dir %pylibdir/concurrent/
%dir %pylibdir/concurrent/__pycache__/
%pylibdir/concurrent/*.py
%pylibdir/concurrent/__pycache__/*%bytecode_suffixes

%dir %pylibdir/concurrent/futures/
%dir %pylibdir/concurrent/futures/__pycache__/
%pylibdir/concurrent/futures/*.py
%pylibdir/concurrent/futures/__pycache__/*%bytecode_suffixes

%dir %pylibdir/ctypes/
%dir %pylibdir/ctypes/__pycache__/
%pylibdir/ctypes/*.py
%pylibdir/ctypes/__pycache__/*%bytecode_suffixes
%pylibdir/ctypes/macholib

%dir %pylibdir/dbm/
%dir %pylibdir/dbm/__pycache__/
%pylibdir/dbm/*.py
%pylibdir/dbm/__pycache__/*%bytecode_suffixes

%dir %pylibdir/distutils/
%dir %pylibdir/distutils/__pycache__/
%pylibdir/distutils/*.py
%pylibdir/distutils/__pycache__/*%bytecode_suffixes
%pylibdir/distutils/README
%pylibdir/distutils/command

%dir %pylibdir/email/
%dir %pylibdir/email/__pycache__/
%pylibdir/email/*.py
%pylibdir/email/__pycache__/*%bytecode_suffixes
%pylibdir/email/mime
%doc %pylibdir/email/architecture.rst

%pylibdir/encodings

%dir %pylibdir/ensurepip/
%dir %pylibdir/ensurepip/__pycache__/
%pylibdir/ensurepip/*.py
%pylibdir/ensurepip/__pycache__/*%bytecode_suffixes
%pylibdir/ensurepip/_bundled

%pylibdir/html
%pylibdir/http

%dir %pylibdir/importlib/
%dir %pylibdir/importlib/__pycache__/
%pylibdir/importlib/*.py
%pylibdir/importlib/__pycache__/*%bytecode_suffixes

%dir %pylibdir/importlib/metadata
%dir %pylibdir/importlib/metadata/__pycache__/
%pylibdir/importlib/metadata/*.py
%pylibdir/importlib/metadata/__pycache__/*%bytecode_suffixes

%dir %pylibdir/json/
%dir %pylibdir/json/__pycache__/
%pylibdir/json/*.py
%pylibdir/json/__pycache__/*%bytecode_suffixes

%pylibdir/lib2to3
%exclude %lib2to3_tests
%pylibdir/logging
%pylibdir/multiprocessing
%exclude %pylibdir/multiprocessing/popen_spawn_win32.py
%exclude %pylibdir/multiprocessing/__pycache__/popen_spawn_win32%bytecode_suffixes
%pylibdir/pydoc_data

%exclude %pylibdir/turtle.py
%exclude %pylibdir/__pycache__/turtle*%bytecode_suffixes

%dir %pylibdir/unittest/
%dir %pylibdir/unittest/__pycache__/
%pylibdir/unittest/*.py
%pylibdir/unittest/__pycache__/*%bytecode_suffixes

%pylibdir/urllib

%dir %pylibdir/venv/
%dir %pylibdir/venv/__pycache__/
%pylibdir/venv/*.py
%pylibdir/venv/__pycache__/*%bytecode_suffixes
%pylibdir/venv/scripts

%pylibdir/wsgiref
%pylibdir/xml
%pylibdir/xmlrpc

%dir %pylibdir/zoneinfo/
%dir %pylibdir/zoneinfo/__pycache__/
%pylibdir/zoneinfo/*.py
%pylibdir/zoneinfo/__pycache__/*%bytecode_suffixes

# "Makefile" and the config-32/64.h file are needed by
# distutils/sysconfig.py:_init_posix(), so we include them in the core
# package, along with their parent directories (bug 531901):
%dir %pylibdir/config-%pybasever%pyabi-%pyarch/
%pylibdir/config-%pybasever%pyabi-%pyarch/Makefile
%dir %include_dir/
%include_dir/%_pyconfig_h

%files -n libpython3
%_libdir/libpython%pybasever%pyabi.so.*

%files dev
%pylibdir/config-%pybasever%pyabi-%pyarch/*
%exclude %pylibdir/config-%pybasever%pyabi-%pyarch/Makefile
%include_dir/*.h
%dir %include_dir/cpython
%dir %include_dir/internal
%include_dir/internal/*.h
%include_dir/cpython/*.h
%exclude %include_dir/%_pyconfig_h
%doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit
%_bindir/python3-config
%_bindir/python%pybasever-config
%_libdir/libpython3.so
%_libdir/libpython%pybasever%pyabi.so
%_libdir/pkgconfig/python3.pc
%_libdir/pkgconfig/python-%pybasever.pc
%_libdir/pkgconfig/python-%pybasever-embed.pc
%_libdir/pkgconfig/python3-embed.pc

%files tools
%_bindir/python3-2to3
%_bindir/2to3-%pybasever
%_bindir/idle*
%_bindir/pathfix.py
%_desktopdir/idle3.desktop
%_miconsdir/idle3.png
%_niconsdir/idle3.png
%_liconsdir/idle3.png

%tool_dir
%exclude %tool_dir/scripts/run_tests.py
%doc %pylibdir/Doc

%if_with tk
%files modules-tkinter
%pylibdir/idlelib
%exclude %pylibdir/idlelib/idle_test
%pylibdir/tkinter
%exclude %pylibdir/tkinter/test
%dynload_dir/_tkinter.cpython-%pyshortver%pyabi.so
%pylibdir/turtle.py
%pylibdir/__pycache__/turtle*%bytecode_suffixes
%dir %pylibdir/turtledemo
%pylibdir/turtledemo/*.py
%pylibdir/turtledemo/*.cfg
%dir %pylibdir/turtledemo/__pycache__/
%pylibdir/turtledemo/__pycache__/*%bytecode_suffixes
%endif

%files modules-sqlite3
%dir %pylibdir/sqlite3/
%dir %pylibdir/sqlite3/__pycache__/
%pylibdir/sqlite3/*.py
%pylibdir/sqlite3/__pycache__/*%bytecode_suffixes
%dynload_dir/_sqlite3.cpython-%pyshortver%pyabi.so

%files modules-curses
%pylibdir/curses
%dynload_dir/_curses.cpython-%pyshortver%pyabi.so
%dynload_dir/_curses_panel.cpython-%pyshortver%pyabi.so

%if_with tk
%files test
%pylibdir/ctypes/test
%pylibdir/distutils/tests
%lib2to3_tests
%pylibdir/sqlite3/test
%pylibdir/test
%dynload_dir/_ctypes_test.cpython-%pyshortver%pyabi.so
%dynload_dir/_testbuffer.cpython-%pyshortver%pyabi.so
%dynload_dir/_testcapi.cpython-%pyshortver%pyabi.so
%dynload_dir/_testimportmultiple.cpython-%pyshortver%pyabi.so
%pylibdir/idlelib/idle_test
%pylibdir/tkinter/test
%pylibdir/unittest/test
%tool_dir/scripts/run_tests.py
%endif

%changelog
* Thu Aug 04 2022 Grigory Ustinov <grenka@altlinux.org> 3.10.6-alt1
- Updated to upstream version 3.10.6.

* Thu Jun 16 2022 Grigory Ustinov <grenka@altlinux.org> 3.10.5-alt1
- Updated to upstream version 3.10.5.

* Thu Mar 24 2022 Grigory Ustinov <grenka@altlinux.org> 3.10.4-alt1
- Updated to upstream version 3.10.4.

* Mon Mar 21 2022 Grigory Ustinov <grenka@altlinux.org> 3.10.3-alt1
- Updated to upstream version 3.10.3.

* Fri Feb 04 2022 Ilya Kurdyukov <ilyakurdyukov@altlinux.org> 3.10.2-alt1.1
- Fixed build and excluded hanging tests for Elbrus.

* Wed Feb 02 2022 Grigory Ustinov <grenka@altlinux.org> 3.10.2-alt1
- Updated to upstream version 3.10.2.

* Thu Dec 02 2021 Grigory Ustinov <grenka@altlinux.org> 3.10.0-alt1
- Updated to upstream version 3.10.0.

* Wed Dec 01 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.9-alt1
- Updated to upstream version 3.9.9.

* Wed Dec 01 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.8-alt1
- Updated to upstream version 3.9.8.
- Added /proc to BR's (Closes: #41006).

* Fri Oct 01 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.7-alt3
- Fix previous change to make python link as shared library (Closes: #40939).

* Mon Sep 20 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.7-alt2
- Bring back static build (thx to ilyakurdyukov@) (Closes: #40939).

* Tue Sep 14 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.7-alt1
- Updated to upstream version 3.9.7.

* Wed Jun 30 2021 Ilya Kurdyukov <ilyakurdyukov@altlinux.org> 3.9.6-alt2
- Removed changes from ALT39329, restores -O3 and -g flags (Closes: #40278).
- Updated Elbrus fixes.
- Enabled optimizations (armh excluded due to test_hashlib crash).

* Tue Jun 29 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.6-alt1
- Updated to upstream version 3.9.6.
- Removed duplicated shared building (Closes: #40291).
- Enabled valgrind on some arches.

* Tue May 11 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.5-alt1
- Updated to upstream version 3.9.5.

* Mon Apr 05 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.4-alt1
- Updated to upstream version 3.9.4.
- Fix multiple -O3 and -g flags (Closes: #39329).

* Thu Feb 25 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.2-alt1
- Updated to upstream version 3.9.2.
- Fixed building on e2k arch.

* Tue Jan 19 2021 Grigory Ustinov <grenka@altlinux.org> 3.9.1-alt1
- Updated to upstream version 3.9.1.
- Removed python3-tools dependency on python3-modules-nis (Closes: #39308).
- Removed python3-modules-nis.
- Filtered python2-base from requires (Closes: #39246).

* Thu Oct 01 2020 Grigory Ustinov <grenka@altlinux.org> 3.8.6-alt1
- Updated to upstream version 3.8.6.

* Wed Jul 22 2020 Grigory Ustinov <grenka@altlinux.org> 3.8.5-alt1
- Updated to upstream version 3.8.5.

* Fri May 15 2020 Grigory Ustinov <grenka@altlinux.org> 3.8.3-alt1
- Updated to upstream version 3.8.3.

* Fri Mar 13 2020 Grigory Ustinov <grenka@altlinux.org> 3.8.2-alt1
- Updated to upstream version 3.8.2.
- Fixed python3-config --configdir output.

* Fri Jan 24 2020 Grigory Ustinov <grenka@altlinux.org> 3.8.1-alt1
- Updated to upstream version 3.8.1.
- Restructured patching scheme about lib64 and site-packages.
- Add Requires on tcl-tix (thx to vseleznv@).
- Translate idle desktop file (Closes: #37307).
- platform._supported_dists deprecated since 3.5 now vanished (Closes: #33677).
- help() now shows MODULE REFERENCE on 64bit systems (Closes: #36622).

* Fri Jan 24 2020 Anton V. Boyarshinov <boyarsh@altlinux.org> 3.7.4-alt3
- hackaround forbidden python-base dep
- 'Trusted mode': optional modules loading paths restriction

* Fri Oct 18 2019 Sergey Bolshakov <sbolshakov@altlinux.ru> 3.7.4-alt2
- fix packaging on armh arch

* Thu Jul 25 2019 Grigory Ustinov <grenka@altlinux.org> 3.7.4-alt1
- Updated to upstream version 3.7.4.
- Add patch fixing lzma library.
- Added bluez, x11, gl, tk knobs (on by default). (thx to mike@)
- Cleaned up gdbm, rewheel, valgrind knobs. (thx to mike@)
- E2K: avoid lcc-unsupported valgrind option. (thx to mike@)

* Tue Apr 02 2019 Grigory Ustinov <grenka@altlinux.org> 3.7.3-alt1
- Updated to upstream version 3.7.3 (Closes: #36297).
- Added list of architectures which has multilib support in ALT (thx to arei@).
- Added pathfix.py to python3-tools (thx to viy@).
- Bring back venv support (thx to obirvalger@ and imz@) (Closes: #32211).
- Add idle desktop file (Closes: #27542.)

* Tue Jan 29 2019 Aleksei Nikiforov <darktemplar@altlinux.org> 3.6.8-alt1
- Updated to upstream version 3.6.8
- Removed dependency on rpm-build-python3 from python3 package (Closes: #35992)
- Applied security fix (Fixes: CVE-2019-5010)

* Wed Aug 29 2018 Grigory Ustinov <grenka@altlinux.org> 3.6.5-alt1.1
- NMU: Rebuild with new openssl 1.1.0.

* Thu Jun 07 2018 Aleksei Nikiforov <darktemplar@altlinux.org> 3.6.5-alt1
- Updated to upstream version 3.6.5.

* Fri Jun 01 2018 Andrey Bychkov <mrdrew@altlinux.org> 3.6.4-alt3.1
- fix regular expression in patch1008

* Wed May 30 2018 Andrey Bychkov <mrdrew@altlinux.org> 3.6.4-alt3
- Added cleaning os-release parameters (patch1008)

* Tue May 08 2018 Andrey Bychkov <mrdrew@altlinux.org> 3.6.4-alt2
- Fixed incorrect detection of information of some distributions (Closes: #34421)

* Tue Apr 03 2018 Aleksei Nikiforov <darktemplar@altlinux.org> 3.6.4-alt1
- Updated to upstream version 3.6.4.

* Thu Mar 29 2018 Stanislav Levin <slev@altlinux.org> 3.5.4-alt7
- Add PKG-INFO files to ignore list (closes: #34658).

* Wed Mar 28 2018 Aleksei Nikiforov <darktemplar@altlinux.org> 3.5.4-alt6
- Fixed interpackage dependencies (Closes: 34451).

* Wed Mar 21 2018 Ivan Zakharyaschev <imz@altlinux.org> 3.5.4-alt5
- (.spec) Accelerate %%check through parallellism.

* Fri Mar 16 2018 Grigory Ustinov <grenka@altlinux.org> 3.5.4-alt4
- Edit regular expression for ignore.d list. (thanks for imz@) (Closes: #34660)

* Fri Feb 16 2018 Aleksei Nikiforov <darktemplar@altlinux.org> 3.5.4-alt3
- Fixed build with new glibc.

* Wed Dec 27 2017 Aleksei Nikiforov <darktemplar@altlinux.org> 3.5.4-alt2
- Packed audiotest.au files required by tests.
- Returned some distutils submodules required by setup scripts of numpy.
- Nis module no longer builds with new glibc.

* Sun Oct 29 2017 Anton Midyukov <antohami@altlinux.org> 3.5.4-alt1
- New version 3.5.4

* Mon Sep 04 2017 Aleksei Nikiforov <darktemplar@altlinux.org> 3.5.1-alt10
- Fixed tests with new libexpat.

* Mon Jul 10 2017 Fr. Br. George <george@altlinux.ru> 3.5.1-alt9
- Add PLATFORM_TRIPLET suffix for binary module search

* Tue Apr 11 2017 Gleb F-Malinovskiy <glebfm@altlinux.org> 3.5.1-alt8
- Fixed interpreter breakage caused by rebuild with glibc >= 2.25
  (closes: #33356).

* Wed Mar 22 2017 Vladimir D. Seleznev <vseleznv@altlinux.org> 3.5.1-alt7.qa1
- NMU: rebuilt against Tcl/Tk 8.6.

* Thu May  5 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt7
- python3-modules-tkinter: Requires: tk (ALT#29206)

* Wed May  4 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt6
- (.spec) Adapted for other 64bit archs (thx sbolshakov@).

* Fri Apr 29 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt5
- %%py3_provides os.path (an OS-independent alias, which other modules
  might want to import).
- test: Some good code in lib2to3/tests restored (and some bad code removed).

* Wed Apr 20 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt4.1
- Rebuild with rpm-build-python3-0.1.10.2 (more autoreqs/provs will
  be found, and their default format has been tweaked slightly).

* Wed Apr 20 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt4
- put the Python implementation of python3-config back (as in 3.3)
  because it prints more correct values for --configdir (ALT#32008).

* Thu Apr 07 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt3
- I was wrong in letting __pycache__/ be handled by files.req:
  must be invisible. (Other pkgs gave this crazy Provides as a result.)

* Wed Mar 30 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.5.1-alt2
- Merged the major switch to a common /usr/lib{,64}/python3/site-packages
  done in 3.3:
  + Switch to a common /usr/lib{,64}/python3/site-packages
    (without the minor version).
  + Provide python3.3-ABI: compatible .so in Python modules rely on it.
  + Require rpm-build-python3 (as per ALT Sisyphus RPM Macros Packaging Policy).
  + This package does not "strictly" own /usr/lib{,64}/python3.3 anymore
    (for convenience of the transition and because it makes little sense).

* Wed Mar 30 2016 Gleb F-Malinovskiy <glebfm@altlinux.org> 3.5.1-alt1
- Updated to 3.5.1.
- Synced with Fedora python3-3.5.1-1.

* Wed Mar 30 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.3.1-alt8
- added ignored python3 files pattern for buildreq.
- (.spec) Help verify_elf by pointing %%__libpython3 to our newly
  built library.

* Fri Mar 18 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.3.1-alt7
- Unicode problem with ncurses fixed (RH#539917).
- Unpackage garbage __pycache__/* left-over from unwanted files.
- (.spec) Clean up to fail if the maintainer's intentions get not
  fulfilled because the sources or the build environment have changed.

* Sun Mar  6 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.3.1-alt6
- Switch to a common /usr/lib{,64}/python3/site-packages
  (without the minor version).
- Provide python3.3-ABI: compatible .so in Python modules rely on it.
- Require rpm-build-python3 (as per ALT Sisyphus RPM Macros Packaging Policy).
- This package does not "strictly" own /usr/lib{,64}/python3.3 anymore
  (for convenience of the transition and because it makes little sense).

* Sat Mar  5 2016 Ivan Zakharyaschev <imz@altlinux.org> 3.3.1-alt5
- do not test SSL (this is currently broken in Sisyphus anyway, but we
  need to be able to rebuild; the SSL-bugs haven't gone away and need
  a fix; but we are moving to 3.5 very soon)

* Tue Apr 16 2013 Aleksey Avdeev <solo@altlinux.ru> 3.3.1-alt4
- remove subpackage %%name-modules-idlelib (moved to
  %%name-modules-tkinter)
- move %%_libdir/python*/Tools/scripts/run_tests.py to subpackage
  %%name-test

* Fri Apr 12 2013 Aleksey Avdeev <solo@altlinux.ru> 3.3.1-alt3
- add subpackage %%name-modules-idlelib

* Fri Apr 12 2013 Aleksey Avdeev <solo@altlinux.ru> 3.3.1-alt2
- fix gcc 4.8 incompatibility (rhbz#927358); regenerate autotool
  intermediates
- fix error in platform.platform() when non-ascii byte strings are
  decoded to unicode (rhbz#922149)

* Fri Apr 12 2013 Aleksey Avdeev <solo@altlinux.ru> 3.3.1-alt1
- version up to 3.3.1
- skip test_posix_fadvise: RLIMIT_CPU 1000000 unavailable in hasher

* Fri Mar 29 2013 Aleksey Avdeev <solo@altlinux.ru> 3.3.0-alt1
- version up to 3.3.0
- add support for Bluetooth

* Wed May 09 2012 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.3-alt3
- base: add python3.x(builtins) to Provides

* Thu Apr 19 2012 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.3-alt2
- python-3.2.3-autoconf-sem_open_check-alt.patch

* Thu Apr 12 2012 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.3-alt1
- 3.2.3

* Mon Mar 26 2012 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.2-alt4
- build python3 binary with static libpython3
- split up independent libpython3 subpackage with shared library
- change optimization to -O3

* Thu Jan 26 2012 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.2-alt3
- repair build with fresh rpm-build-python3
- enable check

* Wed Dec 21 2011 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.2-alt2
- rebuild with rpm-build-python3
- split up, rename subpackages

* Tue Dec 06 2011 Vitaly Kuznetsov <vitty@altlinux.ru> 3.2.2-alt1
- initial Python3 port from Fedora